Denon DN-X1100 Owners Manual - Page 6

Getting Started Connections Fader Start Specifications ENGLISH Part Names and Functions Top Panel E2 E1 W9W8 W7 E0 q w e r t y u Q8 i Q7 o Q0 Q1 Q2 Q3 Q1 Q4 Q5 Q6  q MAIN MIC ON/OFF button i HEADPHONE PAN control When the button is lit, Main Mic signal is Serves two purposes∙∙∙ In the STEREO mode transferred to output section, otherwise Main it changes the relative levels of the Cue and Mic input is muted. Program mixed together in both ear cups. In the w AUX MIC ON/OFF button When the button is lit, Aux Mic signal is transferred to output section, otherwise Aux Mic input is muted. MONO mode it changes the balance between the Mono Cue in the left ear cup and the Mono Program in the right. o HEADPHONE level control e MAIN MIC LEVEL control Adjusts the level of the Main Mic input. Adjusts the volume for the headphones. Q0 HEADPHONE output jack r AUX MIC LEVEL control Adjusts the level of the Aux Mic input. Accepts 1/4" stereo headphone plugs. Q1 CROSSFADER START A, B switches t MIC EQ controls Use this to switch the Crossfader Start function W6 Contour the frequency response of the Mic ON and OFF. input -12 dB to +12 dB. Q2 CROSSFADER HI Controls the relative output level from the Adjusts high-tone Mic sound -12 dB to +12 dB. summed A and B Mixes. When the fader is At the center position, sound is flat. at its far left, only the A Mix is heard from the MID Outputs. As the fader is moved toward the W5 Adjusts mid-tone Mic sound -12 dB to +12 dB. right, the amount of B Mix is increased and the At the center position, sound is flat. amount of A Mix is decreased. When the fader LOW is centered, equal amounts of A and B Mixes are W4 Adjusts low-tone Mic sound -12 dB to +12 dB. routed to the Outputs. Fully right is all B Mix at At the center position, sound is flat. the Outputs. y DUCKING ON/OFF button • LINE 2, 4, 6, 8 FADER output terminals • Use this to switch the Talk Over function ON and (Rear Panel i (vpage 4)) W3 OFF. (ON/OFF is cyclic) ø 3.5 mm stereo mini terminal • When the button is lit, level of signals except Others should not be affected a terminal short- Mics is attenuated. circuit. • The DUCKING attenuation level adjusts. See Q3 Source input fader (Ch. fader) W2 below rear panel o (vpage 4). u SPLIT CUE button Controls the level of the selected Input. Q4 CROSSFADER ASSIGN switches • In the STEREO mode, this button feeds STEREO Program (CUE MASTER) and Cue to both W1 earcups, in the SPLIT CUE (MONO) mode, the headphone circuit provides MONO Cue to the left ear and MONO Program (MASTER) to the W0 right. • In the STEREO mode, the meter indicates the A, B: The channel source is assigned to A or B of the Crossfader. THRU: Select when you don't assign the channel source into the Crossfader. stereo level in the LEFT and RIGHT Master Outputs. In the SPLIT CUE (MONO) mode, Q9 mono Cue level is displayed on the Left meter and mono Program (CUE MASTER) level is displayed on the Right meter. • In the SPLIT CUE (MONO) mode, the button is lit.