Denon DN X1700 Owners Manual - Page 23

Specifications n AUDIO (0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms) • PHONO inputs Stereo x 4 Unbalanced RCA terminal Input impedance: 47 kΩ/kohms Level: -40 dBV (10 mV) • CD inputs Stereo x 4 Unbalanced RCA terminal Input impedance: 10 kΩ/kohms Level: 0 dBV • Equalizer (LINE) Band x 3 Channel equalization adjustment range: HI: -∞,-90 dB to +10 dB MID: -∞,-90 dB to +10 dB LOW: -∞,-90 dB to +6 dB • RETURN inputs Monaural x 2 1/4" TS terminal Input impedance: 10 kΩ/kohms Level: -10dBV/0dBV (Default: -10dBV) • MIC inputs Monaural x 2 MIC1: Balanced and unbalanced XLR connectors and 1/4" TS terminal (1: Ground, 2: Hot, 3: Cold) MIC2: Balanced 1/4" TRS jack (Tip: hot, ring: cold, sleeve: ground) Input impedance: 5 kΩ/kohms Level: -60 to -20 dBu EIN: Less than -127 dBu (Rs = 150 Ω/ohms) CMRR: More than 80 dB (1 kHz) • Equalizer (MIC) Band x 2 Adjustment range: HI: -15 to +15 dB LOW: -15 to +15 dB • Digital coaxial inputs Stereo RCA terminal x 4, IEC958 Consumer (Fs: 32 kHz to 96 kHz) • USB audio inputs Stereo x 4 (monaural x 8) 24 bit, Fs: 44.1 kHz, 48 kHz, 96 kHz USB B • MASTER output Balanced: Stereo, balanced XLR terminal (1: Ground, 2: Hot, 3: Cold) DA converter: 32-bit 128x oversampling advanced multi-bit converter Load impedance: More than 600 Ω/ohms Level: +4dBu Frequency response: 20 Hz to 20 kHz (±0.5 dB) THD: Less than 0.05% Signal to Noise ratio: 100 dB 89 dB (Phono) Crosstalk: Less than -110 dB (1 kHz) Unbalanced: Stereo RCA terminal Load impedance: 10 kΩ/kohms Level: 0 dBu • REC output Stereo Unbalanced RCA terminal Load impedance: 10 kΩ/kohms Level: -10 dBV • BOOTH output Load impedance: Level: • SEND output Load impedance: Level: • Headphones output Load impedance: Level: • Digital coaxial output • USB audio output n GENERAL USB MIDI I/O: MIDI OUT: Channel level meters: Cue master level meters: Channel Fader: Crossfader: Dimensions: Weight: Supply voltage: Power consumption: Operational temperature: Operational humidity: Storage temperature: Stereo Balanced 1/4" TS terminal (Tip: hot; ring: cold, sleeve: ground) More than 600 Ω/ohms +4 dBu Monaural x 2 Unbalanced 1/4" TS terminal 10 kΩ/kohms -10 dBV Stereo 40 Ω/ohms 400 mW Stereo RCA terminal, IEC958 Consumer (Fs: 44.1 kHz, 48 kHz, 96 kHz) Stereo x 4 (monaural x 8) 24 bit, 44.1 kHz, 48 kHz, 96 kHz USB B IN: 1ch, OUT: 1ch MIDI1.0, MIDI Clock USB B OUT: 1ch MIDI1.0, MIDI Clock 5pin DIN PPM 16-point LEDs from -40 to +10 dB, peak display PPM 24-point LEDs from -50 to +16 dB, peak display 60 mm Conductive Plastic Type fader 45 mm FLEX Fader (Fader Torque Adjustable) 320(W) x 357(D) x 90(H) mm 7.6 Kg AC 120 V, 60 Hz (U.S.A. and Canada models) AC 230 V, 50 Hz (European models) 43 W +5ºC to +35ºC 25% to 85% -20ºC to +60ºC 379mm 357mm 320mm 90mm 112mm Unit: mm 19 Getting Started Connections Basic Operations Effector Function Fader Start USB Utility Specifications Troubleshooting