Dewalt DCR006 User Guide - Page 56
Charging Process - charge
View all Dewalt DCR006 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
ENGLISH NOTE: To ensure maximum performance and life of Li-Ion batteries, charge the battery pack fully before first use. Charging Process Refer to the table below for the charge status of the battery pack. Charge indicators: DCB105 charging fully charged hot/cold pack delay replace battery pack Charge indicators: DCB107, DCB112 charging fully charged hot/cold pack delay *DCB107, DCB112: The red light will continue to blink, but a yellow indicator light will be illuminated during this operation. Once the battery has reached an appropriate temperature, the yellow light will turn off and the charger will resume the charging procedure. The compatible charger(s) will not charge a faulty battery pack. The charger will indicate faulty battery by refusing to light or by displaying problem pack or charger blink pattern. NOTE: This could also mean a problem with a charger. If the charger indicates a problem, take the charger and battery pack to be tested at an authorised service centre. 54