Dewalt DW756 Instruction Manual - Page 10

DW756,758/385498 8/20/01 7:43 AM Page 7 English 7. Inspect the wheel for cracks, chips or any other visible damage (other than normal wear) and discard if such damage is found. Inspect the blotter for damage. If the blotter is missing or severely damaged, replace it with a piece of thin cardboard or blotter paper cut to the same size. NEVER USE A WHEEL WITHOUT A BLOTTER. 8. Install the new wheel or other accessory. Be sure that both wheel washers are in place (concave side toward the wheel) See Fig. 5. For the DW756 see Fig 5 and 6. FIG.5 ARBOR SHAFT WASHER SPACER WASHER ACCESSORY FIG.6 WASHER NUT WASHER SPACER NUT ARBOR SHAFT ACCESSORY 9. Hold as before and tighten the nut firmly but do not overtighten. Overtightening can crack a grinding wheel. 10.Replace the wheel cover and its screws. 11.Adjust the spark guard to 1/16" from the wheel tighten securely. 12.Adjust the tool rest to 1/8" from the wheel and tighten securely. 13.Adjust the eye shield to a point between your eyes and the wheel. The bench grinder is now ready for use. 14.Follow the above steps to install buffing wheels and wire wheel brushes as well as grinding wheels. Important! To assure product safety and reliability, repairs, maintenance and adjustment should be performed by DEWalt (U.S.) Inc. Industrial Service Centers or other qualified service organizations, These service organizations service DeWalt tools always using DeWalt replacement parts. Full Warranty DEWALT heavy duty industrial tools are warranted for one year from date of purchase. We will repair, without charge, any defects due to faulty materials or workmanship. For warranty repair information, call 1-800-4-DEWALT. This warranty does not apply to accessories or damage caused where repairs have been made or attempted by others. This warranty gives you specific legal rights and you may have other rights which vary in certain states or provinces. In addition to the warranty, DEWALT tools are covered by our: 30 DAY NO RISK SATISFACTION GUARANTEE If you are not completely satisfied with the performance of your DEWALT heavy duty industrial tool, simply return it to the participating seller within 30 days for a full refund. Please return the complete unit, transportation prepaid. Proof of purchase may be required. 7