Dewalt DWE74911 Instruction Manual - Page 4

English Definitions: Safety Guidelines The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage. IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY DEWALT TOOL, CALL US TOLL FREE AT: 1-800-4-DEWALT (1-800-433-9258) DW74911 Rolling Table Saw Stand with Folding Legs WARNING: For your own safety, read the table saw instruction manual before using any accessory. Failure to heed these warnings may result in personal injury and serious damage to the table saw and the accessory. When servicing this tool, use only identical replacement parts. This stand is designed for use with table saws only. This stand has been evaluated by UL for use with the DWE7490, DWE7491, and DWE7499 table saws. If you experience a problem with your DEWALT purchase, please call 1-800-4-DEWALT (1-800-433-9258). Tools Required Hex key and small wrench (supplied) Socket or wrench set Contents Stand, right side Stand, left side Wheels (2) Rear axle Kickstand assembly Tube plugs (2) Handle assembly Handle feet (2) Carriage head bolts (2) M6x12 pan bolts (2) M8x40 hex head bolts (4) M8x40 pan head bolts (4) M8 lock nuts (12) Flat washers (2) Saw mounting hardware: M8x75 pan head bolts (4) M8 lock nuts (4) General Safety Instructions for Table Saw Accessories WARNING: To reduce the risk of personal injury: • ALWAYS use eye protection. All users and bystanders must wear eye protection that conforms to ANSI Z87.1. • Ensure all stand fasteners are securely fastened and that all stand mechanisms are in proper working order before operating the table saw. 2