Dymo 69100 Quick Start Guide - Page 7
Loading Labels, To load a label roll, leaving no gap
View all Dymo 69100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
4. Loading Labels To load a label roll Spool Spool spindle guide 1 Press the form-feed button to eject the labels that protected the printer during shipment. 2 Open the top cover and remove any packing material inside the label compartment. 3 Remove the label spool from inside the cover. Figure 7 4 Hold the spool spindle in your left hand and place the label roll on the spindle so that the labels feed from underneath and the left edge of the label roll is flush against the side of the spool. See Figure 7. 5 Place the spool guide onto the right side of the spool Figure 8 and press the guide tightly against the side of the label roll, leaving no gap between the roll and the spool. See Figure 8. NOTE The label roll must fit snugly against both sides of the label spool, with no gaps, to avoid drifting as the labels feed through the printer. 6 Insert the label spool into the slot in the printer cover with the labels extending from underneath the roll. See Figure 9. Figure 9 5