Dynex DX-L32-10A User Manual (English) - Page 19

Understanding the basics Setup menu Parental Controls 15 Navigating the menus Press to display the main menu. Press to select menus, to adjust selected items, or move on-screen cursor left or right. Channel menu Press to select the menu items. Press to confirm your selection or enter a sub-menu. Press to return to the previous screen. Press to close the menu. Notes: Depending on the signal source selected, you may see different options on your screen. The above menus are shown in TV mode. Menu items that are not selectable are grayed out. Menus in this manual are described in TV mode, unless otherwise indicated. The illustrations and screens shown in the manual are for explanation purposes and may vary from the actual screens on your TV. Selecting a channel To select a channel: • Press CH or CH to go to the next or previous channel on the memorized channel list. • Press the number buttons to enter the analog or digital (main) channel number you want, then wait for the channel to change, or press ENTER to change the channel immediately. • To select a digital sub-channel, press the number buttons to select the main digital channel, then press the dot (.) button to select the sub-channel. Wait for the channel to change, or press ENTER to change the channel immediately. Note: Button presses must be within three seconds of each other. • Press RECALL to go to the last channel viewed. • Press CH-LIST to display a list of memorized channels, press or to select the channel you want from the list, then press ENTER to go to that channel. • Press FAVORITE to display a list of your saved favorite channels, press or to select the channel you want from the list, then press ENTER to go to that channel. Note: If either list has more than one page, press or to scroll through the pages.