Dynex DX-LTDVD20 User Manual (English) - Page 8
Connecting a standard video device, VIDEO, AUDIO L, INPUT, Y/Pb/Pr, Component - support
View all Dynex DX-LTDVD20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
8 Connecting a standard video device Note Your TV supports multiple video source inputs. For temporary or easy-access video connections, use the side jacks (AV2). For more permanent connections, use the rear jacks (AV1). Setting up your TV combo To connect an standard S-Video device to AV1 jacks: 1 Plug an S-Video cable (4) into the S-Video out jack on an S-Video device (1) and into the S-VIDEO jack (5) on the back of your TV combo. 2 Plug the RCA audio cables (2) into the S-Video device audio output jacks and into the AUDIO L and AUDIO R jacks (1) on the back of your TV combo. 3 Turn on your TV combo. 4 Press INPUT and the or to select S-Video. Connecting a component video device 8 PHONES INPUT 2 VIDEO L AUDIO R 5 VIDEO AUDIO L R S-VIDEO INPUT 1 3 CR / PR Y COAXIAL CB / PB INPUT AUDIO L R 6 2 3 7 4 1 To connect an standard video device to the AV1 jacks: 1 Plug an RCA video cable (2) into a standard video device (1) and into the VIDEO jack on the back of your TV combo. 2 Plug the RCA audio cables (2) into the video device's audio output jack and into the upper AUDIO L and AUDIO R jacks on the back of your TV combo. 3 Turn on your TV combo. 4 Press INPUT and the or to select AV1. To connect an external video device to the AV2 jacks: 1 Plug the RCA video connector (7) into a standard video device (1) and VIDEO jack (8) on the side of your TV combo. 2 Plug the RCA audio connectors (6) into the audio out jacks on the video device and into the AUDIO L and AUDIO R jacks (8) on the side of your TV combo. 3 Turn on your TV combo. 4 Press INPUT and the or to select AV2. 2 4 1 To connect a progressive-scan or HDTV video source to Y/Pb/Pr jacks: 1 Plug a component video cable (2) into the progressive-scan or HDTV video device (1) and into the Y/Pb/Pr jacks (3) on the back of your TV combo. 2 Plug the RCA audio cables (4) into the audio out jacks on progressive-scan or HDTV video device and into the lower AUDIO L and AUDIO R jacks (3) on the back of your TV combo. 3 Turn on your TV combo. 4 Press INPUT and the or to select Component.