EMC AX100SC Release Notes - Page 20

Documentation data digests for servers using the 1.05 or 1.06 revisions of the Microsoft Initiator to target CLARiiON iSCSI storage systems. This defect will be corrected in a future version of the Microsoft Initiator. iSCSI digests are primarily used to protect against data corruption from misbehaving network devices in layer 3 networks. Users are advised to use caution when running iSCSI I/O over a problematic layer 3 network without the protection of iSCSI digests. If a CLARiiON iSCSI storage system is deployed in such an environment, it should be configured in a manner that supports digests, for example, a corrected version of the Microsoft Initiator or the QLogic iSCSI HBA. Update to PowerPath Release Notes Š All AX100-Series installation, planning, and troubleshooting documents and software are located on the AX100 support website. For information on accessing the site, refer to the support documentation that shipped with your storage system. Refer only to these documents for prescribed installation and troubleshooting tips when using your AX100-Series storage system. For an overview of the AX100 with PowerPath, be sure to read PowerPath in Action: Maintaining Access to Virtual Disks in the AX100 (click PowerPath in the Technical descriptions section of the AX100 support website). Š A LUN on other EMC storage systems is known as a virtual disk in an AX100-Series storage system. Š When there are references to accessing Powerlink, ESM, and Elab Navigator, instead click Supported Configurations in the Technical descriptions section of the AX100 support website Š Issue Tracker is not supported. 20 EMC AX100-Series Integrated Management Software Release Notes