EVGA 131-GT-E767-TR User Guide - Page 22

Connecting SATA Cables - rx

Get EVGA 131-GT-E767-TR PDF manuals and user guides View all EVGA 131-GT-E767-TR manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

8-pin ATX 12V Power (PW12) PW12, the 8-pin ATX 12V power connection, is used to provide power to the CPU. Align the pins to the connector and press firmly until seated. Connecting SATA Cables The SATA II connector is used to connect the SATA II device to the motherboard. These connectors support the thin SATA II cables for primary storage devices. The current SATA II interface allows up to 300MB/s data transfer rate. There are six (6) internal SATA connectors on this motherboard. Connection points SATA0 - SATA5, are controlled by the South Bridge Chipset. These connection points support RAID 0, RAID 1, RAID 5 and RAID 10 configurations. There are also two (2) SATA 6Gbps Connectors on the motherboard. Connection points SATA6 and SATA7 Which connect to SATA 6Gbps capable devices and allow a maximum transfer rate of up to 6Gbps. RX+ TX- GND RXGND TX+ GND SATA 4 (bottom) SATA 2 (bottom) SATA 0 (bottom) SATA 6 (bottom) SATA 5 (top) SATA 3 (top) SATA 1 (top) SATA 7 (top) (SATA 6Gbps) Connect the locking cable end to the motherboard connector. Connect the end without the lock to the SATA device.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
8-pin ATX 12V Power (
PW12
)
PW12
, the 8-pin ATX 12V power connection, is used to provide power to the CPU. Align
the pins to the connector and press firmly until seated.
Connecting SATA Cables
The SATA II connector is used to connect the SATA II device to the motherboard.
These connectors support the thin SATA II cables for primary storage devices. The
current SATA II interface allows up to 300MB/s data transfer rate.
There are six (6) internal SATA connectors on this motherboard. Connection points
SATA0 - SATA5, are controlled by the South Bridge Chipset. These connection
points support RAID 0, RAID 1, RAID 5 and RAID 10 configurations.
There are also two (2) SATA 6Gbps Connectors on the motherboard.
Connection
points SATA6 and SATA7 Which connect to SATA 6Gbps capable devices and
allow a maximum transfer rate of up to 6Gbps.
SATA 2 (bottom)
SATA 3 (top)
Connect the locking cable end to
the motherboard connector.
Connect the end without the lock
to the SATA device.
SATA 0 (bottom)
SATA 1 (top)
GND
RX+
RX-
GND
TX-
TX+
GND
SATA 4 (bottom)
SATA 5 (top)
SATA 6 (bottom)
SATA 7 (top)
(SATA 6Gbps)