EVGA 131-GT-E767-TR User Guide - Page 38
Manual, Large
View all EVGA 131-GT-E767-TR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Press Enter to auto-detect IDE and SATA channels in the system. Once the channel is detected, the values for Capacity, Cylinder, Heads, Precomp, Landing Zone, and Sector are automatically filled in. None There is no HDD installed or set. Auto The system can auto-detect the hard disk when booting up. Manual When you set the channel to [Manual] and change Access Mode to [CHS], you can then enter the number of cylinders, heads, Precomp, landing zone, and sector. You can manually enter the values or you can press Enter to display a window that tells you the min and max values. IDE HDD Auto-Detect [Press Enter] IDE Channel 0 Slave Access Mode Capacity Cylinder Head Precomp Landing Zone Sector [Manual} [CHS] 0 MB .....0 [ 0] [ 0] [ 0] [ 0] Press ENTER to display sub-menu or enter number manually Cylinder Min= 0 The BIOS supports the following HDD Max=65535 Access Modes: CHS Key in a DEC number : For HDD less than 528 MB. LBA For HDD greater than 528 MB and :Move ENTER:Accept supporting LBA (Logical Block Addressing). Large For HDD greater than 528 MB but not supporting LBA. Auto Recommended mode. ESC:Abort