EVGA 132-CK-NF79-TR User Manual - Page 34
Fan Connections
View all EVGA 132-CK-NF79-TR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Hardware Installation Fan Connections There are five fan connections on the motherboard. The fan speed can be detected and viewed in the PC Health Status section of the CMOS Setup. The fans are automatically turned off after the system enters S3, S4 and S5 mode. Fan Connector Install the fan on the nForce 790i Ultra SLI MCP to draw heat from the MCP and the SPP. The fans plug into a 3-pin connector. 3 21 GND SENSE +12V VREG Fan AUX Fan CPU Fan Note that the CPU fan cable can be either a 3-pin or a 4-pin connector. Connect a 3-pin connector to pins 1, 2, and 3 on the motherboard connector. CPU Fan Connector 4 3 2 GND SENSE PWR CONTROL EVGA Corporation January 11, 2008 | DU-03751-001_v01 23
Hardware Installation
EVGA Corporation
January 11, 2008
|
DU-03751-001_v01
23
Fan Connections
There are five fan connections on the motherboard. The fan speed can be
detected and viewed in the
PC Health Status
section of the CMOS Setup.
The fans are automatically turned off after the system enters S3, S4 and S5
mode.
Note that the CPU fan cable can be either a 3-pin or a
4-pin connector. Connect a 3-pin connector to pins 1, 2,
and 3 on the motherboard connector.
CPU Fan
Connector
4
3
2
GND
SENSE
PWR
CONTROL
Install the fan on the nForce 790i
Ultra SLI MCP to draw heat from the
MCP and the SPP. The fans plug into
a 3-pin connector.
Fan Connector
3
2
1
GND
+12V
SENSE
AUX Fan
CPU Fan
VREG Fan