EVGA 132-CK-NF79-TR User Manual - Page 38
Jumper Settings
View all EVGA 132-CK-NF79-TR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Hardware Installation Jumper Settings The motherboard contains a 3-pin BIOS configuration jumper that enables all board configurations to be done in the BIOS Setup program. The silk screen on the motherboard shows a ∆ next to pin 1. Clear CMOS Jumper: CLR_CMOS The motherboard uses the CMOS RAM to store all the set parameters. The CMOS can be cleared by removing the CMOS jumper. Use the following procedure to clear CMOS: Pin 1 1. Turn off the AC power supply 2. Connect pins 1 and 2 together using the jumper cap. 3. Return the jumper setting to normal (pins 2 and 3 together with the jumper cap). 4. Turn the AC power supply back on. Card Edge EVGA Corporation January 11, 2008 | DU-03751-001_v01 27
Hardware Installation
EVGA Corporation
January 11, 2008
|
DU-03751-001_v01
27
Jumper Settings
The motherboard contains a 3-pin BIOS configuration jumper that enables
all board configurations to be done in the BIOS Setup program.
The silk screen on the motherboard shows a
∆
next to pin 1.
Clear CMOS Jumper: CLR_CMOS
The motherboard uses the CMOS RAM to store all the set parameters.
The CMOS can be cleared by removing the CMOS
jumper.
Use the following procedure to clear CMOS:
1.
Turn off the AC power supply
2.
Connect pins 1 and 2 together using the jumper cap.
3.
Return the jumper setting to normal (pins 2 and 3
together with the jumper cap).
4.
Turn the AC power supply back on.
Pin 1
Card
Edge