Edimax BR-6478Gn Manual - Page 48
Root AP SSID
View all Edimax BR-6478Gn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Item Name Band ESSID Channel Number Associated Clients Root AP SSID Site Survey Wireless Module Description Select from one of the following options: 2.4GHz (B): Allows 802.11b wireless network clients to connect to this router. 2.4GHz (N): Allows 802.11n wireless network clients to connect to this router. 2.4GHz (B+G): Allows 802.11b and 802.11g wireless network clients to connect to this router. 2.4GHz (G): Allows 802.11g wireless network clients to connect to this router. 2.4GHz (B+G+N): Allows 802.11b, 802.11g, and 802.11n wireless clients to connect to this router (recommended). This is the name of your router. You can type any alphanumerical character here (maximum 32 characters). Select a channel from the dropdown menu. All access points must use the same channel (1 to 13). Click "Show Active Clients" for the list of all connected wireless clients. Click "Refresh" in the new window to renew the list, and click "Close" to close the window. Note: If you have a pop‐up blocker installed, you may have to disable it, or set it to allow the pop‐up window to show up. Input the SSID of the wireless access point with which you wish to connect. Click "Select Site Survey" and a pop‐up window will appear. All reachable wireless access points will be shown in the window. Select a wireless access point from the list, and click "Done" to establish a connection. Clicking "Refresh" will renew the list. Select "Enable" to turn on the 2.4GHz wireless signal and select "Disable" to turn it off. 47