Edimax IC-3116W User Manual - Page 57
IV-4-2., Advanced, Firmware Filename, Upgrade Firmware, Backup Settings, Restore Settings, Restart
View all Edimax IC-3116W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
IV-4-2. Advanced The "Advanced" page allows you to upgrade the network camera's firmware, backup or restore the network camera's settings, and reset or restart the network camera. Please check the Edimax website for the latest firmware for your network camera. Do not switch off or disconnect the device during a firmware upgrade, as this could damage the device. Firmware Filename Upgrade Firmware Backup Settings Restore Settings Restart Click "Browse" to locate the firmware file on your computer. Click to upgrade the firmware to your selected file. Click "Apply" to save the current settings on your computer as config.bin file. Click "Browse" to find a previously saved config.bin file and then click "Upload" to replace your current settings. Click "Restart Network Camera" to restart the network camera. Please wait a couple of minutes for network camera to boot up after a restart. Restarting will not affect the camera's current configuration. 57