Electrolux E30EW75EPS Installation Instructions - Page 6
Checking Operation - parts
View all Electrolux E30EW75EPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ELECTRIC WALL OVEN INSTALLATION INSTRUCTIONS 5. Checking Operation If your model is equipped with an Electronic Oven Control. Each of the functions has been factory checked before shipping. However, it is suggested that you verify the operation of the electronic oven controls once more. Refer to the Use & Care Guide . Follow the instructions for the Clock, Timer, Preheat, Bake, Broil Convection and Clean functions. Model and Serial Number Location The serial plate is located inside the oven on the side trim. When ordering parts for or making inquires about your oven, always be sure to include the model and serial numbers and a lot number or letter from the serial plate on your oven. Bake-After setting the oven to 350°F/177°C for baking, the lower element in the oven should become red. Broil-When the oven is set to BROIL, the upper element in the oven should become red. Clean-When the oven is set for a self-cleaning cycle, the lower element will become red. Convection-When the oven is set for a convection, Convection element located at rear of the oven will turn on. Before You Call for Service Read the Avoid Service Checklist and operating instructions in your Use & Care Guide. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance. Refer to the warranty in your Use & Care Guide for our toll-free service number and address. Please call or write if you have inquiries about your product and/or need to order parts. IMPORTANT NOTE: A fan inside the oven will turn on as soon as the oven is operate. 6