Electrolux E32AR75FPS Owners Guide - Page 7

Installation 7 This Owner's Guide provides specific operating instructions for your model. Use the refrigerator only as instructed in this Owner's Guide. Before starting the refrigerator, follow these important first steps. INSTALLATION • Choose a place that is near a grounded electrical outlet. DO NOT use an extension cord or an adapter plug. • For most efficient operation, the refrigerator should be 1" (25mm) located where surrounding temperatures will not drop below 40ºF (5ºC) or exceed 110ºF (43ºC). • Allow the following clearances for ease of installation, proper air circulation, and electrical connections: Sides 3/8 inch 1" (25mm) Back & Top 1 inch • Do not block the toe grille on the lower front of your refrigerator. Sufficient air circulation is essential for the proper operation of your refrigerator. 3/8" (10mm) Refrigerator Freezer NOTE The exterior walls of the refrigerator may become quite warm as the compressor works to transfer heat from the inside. Temperatures as much as 30ºF warmer than room temperature can be expected. DOOR OPENING NOTE If your refrigerator is placed with the door hinge side against a wall, you may have to allow additional space so the door can be opened wider. LEVELING The refrigerator must have all bottom corners resting firmly on a solid floor. The floor must be strong enough to support a fully loaded refrigerator. It is VERY IMPORTANT for your refrigerator to be level in order to function properly. If the refrigerator is not leveled during installation, the door may be misaligned and not close or seal properly, causing cooling, frost or moisture problems.