Electrolux E32AR75FPS Owners Guide - Page 9

Setting The Temperature Controls

Get Electrolux E32AR75FPS - 16.5 cu. Ft. Refrigerator PDF manuals and user guides
UPC - 012505224751
View all Electrolux E32AR75FPS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Installation 9 DOOR REMOVAL If door must be removed: • Unplug the unit • Gently lay refrigerator on its back, on a rug or blanket. • Remove two base screws and base panel. Remove wire from clips on bottom of cabinet, if required. • Unplug connector, if required, by holding the cabinet connector in place and pulling the door connector out. • Remove the bottom hinge screws. • Remove the plastic top hinge cover. • Remove the screws from the top hinge. • Remove the top hinge from the cabinet. • Remove the door and bottom hinge from the cabinet. • To replace door, reverse the above procedures and securely tighten all screws to prevent hinge slippage. SETTING THE TEMPERATURE CONTROLS COOL DOWN PERIOD For safe food storage, allow four (4) hours for refrigerator to cool down completely. The refrigerator will run continuously for the first several hours. ELECTRONIC TEMPERATURE CONTROL The electronic temperature control is located inside the refrigerator. Temperature is factory preset to provide satisfactory food storage temperatures. However, the temperature control is adjustable to provide a range of temperatures for your personal satisfaction. To adjust the temperature setting, move the UP (V) button for warmer temperature and DOWN (W) button for colder temperature on the control panel. Allow several hours for the temperature to stabilize between adjustments.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
9
Installation
DOOR REMOVAL
If door must be removed:
•
Unplug the unit
•
Gently lay refrigerator on its back, on a rug or blanket.
•
Remove two base screws and base panel. Remove
wire from clips on bottom of cabinet, if required.
•
Unplug connector, if required, by holding the cabinet
connector in place and pulling the door connector out.
•
Remove the bottom hinge screws.
•
Remove the plastic top hinge cover.
•
Remove the screws from the top hinge.
•
Remove the top hinge from the cabinet.
•
Remove the door and bottom hinge from the cabinet.
•
To replace door, reverse the above procedures and
securely tighten all screws to prevent hinge slippage.
SETTING THE TEMPERATURE CONTROLS
COOL DOWN PERIOD
For safe food storage, allow four (4) hours for refrigerator to cool down completely.
The refrigerator will run continuously for the first several hours.
ELECTRONIC TEMPERATURE CONTROL
The electronic temperature control is located inside the
refrigerator. Temperature is factory preset to provide
satisfactory food storage temperatures. However, the
temperature control is adjustable to provide a range of
temperatures for your personal satisfaction. To adjust the
temperature setting, move the UP (
) button for warmer
temperature and DOWN (
) button for colder temperature
on the control panel. Allow several hours for the temperature
to stabilize between adjustments.