Electrolux E36DF76EPS Installation Instructions - Page 10

10 Preparing for Installation CABINET AND COUNTERTOP PREPARATION NOTES • If cabinet storage space is to be provided directly above the range, the risk of personal injury may be reduced by installing a ventilating hood that projects horizontally a minimum of 5 inches beyond the face of the cabinets. • The range may be installed flush to the rear wall. We recommend installing a non-concombustible material on the rear wall above the range and up to the vent hood. It is not necessary to install non-combustible materials behind the range below the countertop height. • The minimum distance from the sides of the range above the countertop to combustible side walls must be at least 10 inches. • The E36DF76EPS and E48DF76EPS ranges are delivered with a 3" backguard from the factory. 9" and 24" backguards are available as options. The E30DF74EPS range is delivered with a 6" backguard from the factory. 9" and 12" backguards are available as options. • Utilities may be located: In the lower left corner of the adjacent right cabinet. (Recommended) I M P O R TA N T • Contact your local building department to verify compliance with local code interpretation.