Electrolux E36DF76EPS Installation Instructions - Page 18
Removing The Oven Doors, Re-installing The Oven Doors
View all Electrolux E36DF76EPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
18 Installation REMOVING THE OVEN DOOR(S) WARNING Do not attempt to disengage the hinge catches with the door removed from the oven. The hinge springs could release causing personal injury. Do not lift or carry the oven door by the door handle. Open the door to its fully opened position. Rotate the catch over the retaining arm on each hinge. Lift the oven door to about a 30 degree angle from the horizontal position. Pull the door away from the oven while continuing to lift. Figure 13 To remove oven door, rotate catch as shown. Removing the Oven Door RE-INSTALLING THE OVEN DOOR(S) Grasp the oven door on opposite sides and lift it until the door hinges are aligned with the openings in the oven frame. Holding the door at about a 30° angle from the horizontal, slide the hinges into the openings until the bottom hinge arms drop fully into the hinge receptacles. Lower the door to the fully opened position, and then rotate the two hinge catches toward the oven. Open and close the door completely to ensure that it is properly installed. Peel off the protective layer of plastic that covers the door panel.