Electrolux E36DF76EPS Installation Instructions - Page 19

Installation 19 MAKING THE ELECTRICAL CONNECTION WARNING • Models E30DF74EPS, E36DF76EPS and E48DF76EPS must be connected to a grounded, metallic, permanent wiring system. Alternatively, a grounding conductor should be connected to the grounding terminal or lead on the appliance. Failure to do so may result in an electric shock hazard. • Do not use an extension cord with this appliance. Such use may result in fire, electrical shock, or other personal injury. • Do not install a fuse in the neutral or ground circuit. A fuse in the neutral or ground circuit may result in an electrical shock hazard. Grounding Instructions This appliance must be electrically grounded. With the range positioned directly in front of the cabinet cutout, feed the appliance conduit to the electrical junction box. Then, depending upon local codes, utilize one of the following techniques to connect the appliance to the electrical power supply: Connecting to a Four-Wire Electrical System 1. Separate the green and white appliance wires. 2. Connect the white appliance wire to the neutral (white) supply wire in the junction box. 3. Connect the black appliance wire to the black (L1) power supply wire in the junction box. 4. Connect the red appliance wire to the red (L2) power supply wire in the junction box. 5. Connect the green appliance wire to the green house grounding wire in the junction box. Figure 14 Cable from power supply RED RED GREEN GREEN WHITE WHITE BLACK BLACK Junction box Wire nut (4 places) Conduit from appliance Connecting the appliance to a four-wire power supply