Electrolux E36GC75E Use and Care Guide - Page 15

Cleaningthe, Grates, Simmerplate, Griddle

Page 15 highlights

General Care & Cleaning CLEANINGTHE BURNER GRATES,BURNER CAPS, BURNER HEADS,SIMMER PLATEAND GRIDDLE The Burner Grates, Burner Caps, Burner Heads, simmer plate and gddd}e should be routinely cleaned, Keeping the burner ports ciean will prevent im proper ignition and an uneven flame, Refer to the following instructions: To Remove and Replace the Surface Burner Grate, Surface Burner Cap and Surface Burner Head - Remove in the folJowing order; (1st) Surface Burner Grate, (2rid) Surface Burner Cap, (3rd) Surface Burner Head (See Figure 1). Suff_

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

General Care & Cleaning
CLEANINGTHE
BURNER
GRATES,
BURNER CAPS,
BURNER HEADS,
SIMMERPLATE
AND
GRIDDLE
The
Burner Grates, Burner Caps, Burner Heads, simmer plate
and gddd}e
should
be routinely cleaned, Keeping the burner
ports ciean will prevent im proper ignition and an uneven flame,
Refer to the following instructions:
To Remove
and Replace the
Surface
Burner Grate,
Surface
Burner Cap and
Surface
Burner Head
- Remove
in the folJowing order; (1st) Surface Burner Grate, (2rid) Surface
Burner Cap, (3rd) Surface Burner Head (See Figure 1).
Reverse the procedure above to
replace
the Surface Burner
Cap, Surface Burner
Head
and Surface Burner Grate,
Do not
remove
any
burner parts from the cooktop
until
the
burner parts have completely
cooled
and are safe to
handle. Do not operate the
surface
burners without the
Surface
Burner Caps, Surface
Burner Heads and
Surface
Burner Grates properly in place.
Suff_<_ Burner Grate
To Clean the Burner Caps, Burner Heads, Burner Grates,
Odfice
Simmer
Plate and Gridlle -
Use
a
soap-fil_ed
scouring
Dad
or
a mild
abrasive
cleaner
to
clean
the
surface burner caps and
surface burner heads, The Grates, Simmer Plates
and
Griddle
are designed to be Dishwasher safe for cleaning, The ports (or
slots)
around
the burner heads must be routinely cleaned, If residue
still
remains in these
ports, use a small-gauge
wire or needle to clean
the slots
or holes being careful not to
damage the electrode,
For proper flow of gas
and
ignition
of
the burner--DO
NOT
ALLOW
SPILLS,
FOOD,
CLEANING
AGENTS OR ANY
OTHER
MATERIAL TO ENTER
THE
GAS
ORIFICE
HOLDER OPENING.
ALWAYS
make sure that the
surface
burner cap, the surface
burner
head
and the surface burner grate are
properly in
place
whenever
a surface burner is
}n use,
Surface
Burner
Surface
Burner
Grate
Cap6
_HE_TO_
NOT
REMOVABLE.
Do
not
_ttempt
to
removeorlift_e
cooktop.
1
Figure
1