Electrolux ECVI4262AS Complete Owners Guide English - Page 13

Makeup Air

Page 13 highlights

Exhaust operation Makeup Air Local building codes may require the use of makeup air systems when using ventilation systems greater than specified CFM of air movement. The specified CFM varies from locale to locale. Consult your HVAC professional for specific requirements in your area. Air recirculation operation Recirculated air: Kitchen fumes are removed and after purification are fed back into the room through the upper ventilation openings. The purification takes place via metallic anti-grease filter. No wall breakthrough is required for recirculated air operation. Installing range hood to the wall in recirculation mode For operation of the range hood with recirculation, recirculation kit #EHRKT62AS is needed and can be purchased by calling 1-800-944-9044 (USA) or 1-800-265-8352 (Canada) Follow steps 1 to 4 from Installing range hood to the wall(Exhaust operation) chapter. Fix the recirculation plate to mounting plate with 4 supplied short screws(fig. 22 ).Fix the recirculation box with 8 supplied short screws(fig.23 ). Install charcoal filter to each side of the blower motor by inserting the filters onto the "T" shaped stud and twisting to lock them into place.Reinstall the grease filter close aspiration plate.(fig. 24 ) Fig. 22 Fig. 23 Fig. 24 13 ENGLISH

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

Recirculated air: Kitchen fumes are
removed and after purification are fed back
into the room through the upper ventilation
openings. The purification takes place via
metallic anti-grease filter. No wall
breakthrough is required for recirculated
air operation.
For operation of the range hood with
recirculation, recirculation kit #
EHRKT62AS
is needed and can be purchased by calling
1-800-944-9044 (USA) or 1-800-265-8352
(Canada)
Follow steps 1 to 4 from Installing
range hood to the wall(Exhaust operation)
chapter.
13
ENGLISH
Fix the recirculation plate to mounting plate
with 4 supplied short screws(fig.
).Fix
the recirculation box with 8 supplied short
screws(fig.
).
Install charcoal filter to each side of the
blower motor by inserting the filters onto the
“T” shaped stud and twisting to lock them
into place.Reinstall the grease filter close
aspiration plate.(fig.
)
Fig.
Fig.
Exhaust operation
Air recirculation operation
Installing range hood to the wall in
recirculation mode
22
23
24
Local building codes may require the use
of makeup air systems
when using ventilation systems greater
than specified CFM of air
movement. The specified CFM varies
from locale to locale.
Consult your HVAC professional for
specific requirements in your
area.
Makeup Air
22
23
Fig.
24