Electrolux EDSH4944AS Complete Owners Guide English - Page 22

22 Troubleshooting User Instruction Code USER CODE CLOSE PROBLEM This indicates the door has been left open or not properly latched. SOLUTION Ensuring the door is properly latched will clear the display. This does not indicate a problem with your dishwasher and service will not need to be contacted. Error codes ERROR CODE i10 PROBLEM SOLUTION A low fill has been detected. Look for a pinched water supply line, or water shutoff is not completely opened. i20; i40; iF0 i30 Clogged filters or a restricted drain line has been detected. A leak or overflow of water has been detected in the bottom pan. Check and clean both filters and sump area and check for a pinched or blocked drain hose. If the drain line is attached to a disposer, check that the knockout plug has been removed. Look for loose connections at the water inlet valve and ensure the unit is properly leveled. i50 A problem has been Pressing the cancel button or turning detected with the drain or power off at the breaker for 5 min. wash motor. should clear this error code and the i60 A problem has been unit can be restarted. detected with the water If this does not resolve the heating system. problem, service will need to be called. iC0 A problem has been detected with the electronic control system. *In all Error code instances, if Pressing the cancel button or turning power off at the breaker for 5 min. does not resolve the problem, contact the Electrolux Customer Care Center at 1-877-435-3287.