Electrolux EDSH4944AS Complete Owners Guide English - Page 8
Option selections
View all Electrolux EDSH4944AS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
8 Controls and Settings FAVORITE This cycle allows you to program your preferred cycle and options into one button. To program this cycle, select the cycle and options you desire. Then, press and hold the FAVORITE pad until the LED light above the pad turns ON. The selected cycle and all options are saved as FAVORITE and will illuminate when the FAVORITE cycle is selected. Once programmed, simply press the FAVORITE pad to select the saved cycle and options, press START and close the door immediately to start your cycle. FAST For regularly soiled and pre-rinsed dishes and silverware. Water usage is approximately 4.5 gallons. Wash time is approximately 30 mins. UPPER For lightly soiled and pre-rinsed dishes and silverware when you do not have a full load. Water usage is approximately 3.5 to 4.3 gallons. Wash time ranges from approximately 52 to 128 mins. STEMWARE For regularly soiled China and Crystal. Water usage is approximately 4.9 gallons. Wash time ranges from approximately 96 to 116 mins. Option selections SANITIZE To sanitize your dishes and glassware, select the SANITIZE option. This option heats the water temperature in the final rinse to 157°F (69.4°C) and maintains that temperature for 7 minutes. SANITIZE is available in AUTO, HEAVY, and NORMAL cycles. Only these sanitization cycles have been designed to meet NSF requirements. The cycle time will be extended until the proper water temperature is reached. Washing action will continue during the water heating delay. For best results, the incoming water temperature should be at least 120°F (49°C). If the SANITIZE option is selected, the pad illuminates with a blue light. The sanitization criteria may not be satisfied if there is an interruption of the cycle, a power failure occurs, or if incoming water temperature is below 120°F (49°C). The SANITIZE pad will flash at the end of the cycle if the NSF requirements for sanitization are not reached. AIR DRY If the AIR DRY option is selected, the unit will not energize the heating element. This will reduce energy consumption, but will reduce drying performance. Items in the dish load may not be dry at the end of the cycle. MAX DRY MAX DRY is available on AUTO, HEAVY, NORMAL, UPPER and STEMWARE cycles The cycle time will increase when MAX DRY option is selected. HI TEMP When HI TEMP option is selected, the dishwasher heats water in the main wash to approximately 140°F (60°C). This increase in water temperature helps dishwasher detergent remove food, grease and soil from dishes more effectively and aids in drying. HI TEMP option can only be used with AUTO, HEAVY, NORMAL and UPPER cycles.