Electrolux EDW5505E Service Manual - Page 11

Electrolux EFS - Dishwashing Systems Platform Electrolux Professional Electronic Dishwasher SERVICE MANUAL 7. CYCLE SETTING In this paragraph is explained how to change cycle phases duration (see Tab.1 next page). • Switch on the dishwasher; • Enter into the FACTORY SETTING mode: press and hold down ON/OFF and CYCLE_2 keys for at least 5 seconds (Fig.5.1); • Press CYCLE_2 key to select CYCLE_1 parameters. • Press CYCLE_INFINITE. The display shows alternatively the symbol (Fig.5.2) and the corresponding value (Fig.5.3); • Use CYCLE_1 key to increase the value and CYCLE_2 key to decrease (Fig.5.3); • Press CYCLE_INFINITE key to confirm. The display shows the next parameter (Fig.5.4) and the corresponding value (Fig.5.5); • In the same way is possible to change the other parameters; FAC FAC CY1 Ln1 Fig. 6.1 Factory setting mode. Fig. 6.2 Select next class. Fig. 6.3 Cycle 1 Family: ENTER Fig. 6.4 Wash duration [min]. 0 Sh1 ª © 35 ª © Fig. 6.5 Change value & Store. Fig. 6.6 Wash duration [sec]. Fig. 6.7 Change value & Store. After settled all parameters referring Cycle 1, by pressing CYCLE_2 key is possible to change the Cycle 2 parameters (Fig.5.8, 5.9) and so on. CY1 CY2 Ln2 ... Fig. 6.8 Cycle 1 Parameters. Fig. 6.9 Cycle 2 Parameters: ENTER Fig. 6.10 Wash duration [min]. DOC. NO. 5956.446.06 CY2 Cy3 Ln3 ... ª © Fig. 6.11 Cycle 2 Parameters: next Family Fig. 6.12 Cycle 3 Parameters: ENTER ©Copyright 2005 by Electrolux Professional Fig. 6.13 Wash duration [min]. P.11/88