Electrolux EDW5505E Service Manual - Page 47
Ls5ws / Wt4ws Mono, Prog. 024
View all Electrolux EDW5505E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Electrolux EFS - Dishwashing Systems Platform Electrolux Professional Electronic Dishwasher SERVICE MANUAL LES 0 Detergent level switches not enabled. UI rE 8 ACTIVE function disabled (up to version 3.11 set to 0). 0 Regeneration cycle disabled. ALr 1 ALARMS ENABLED. 3. Switch OFF and then switch ON the machine. LS5WS / WT4WS MONO Prog. 024 1. Switch OFF and then switch ON the machine. 2. CFG Enter into CFG parameter family and set the following parameters. tYP boi doo dFL trc b_t btF LES UI rE ALr 0 0 2 3 0 1 75 0 13 1 1 Hood Type like working cycles. Atmospheric boiler. Front loading door type. Default values for Undercounter models. (for this appliance SOFT START is NOT possible). Tank heater works only if boiler temperature reached. Enable filling tank by means of rinsing cycles. Detergent level switches not enabled. Select user interface for LS5 (up to version 3.11 set to 5). Regeneration cycle enabled. ALARMS ENABLED. 3. Switch OFF and then switch ON the machine. 4. Modify Factory parameters: FAC Enter into FAC parameter family. bt°C bAJ bSt 83 2 2 Boiler Temperature Threshold. Boiler Temperature Adjust. Booster Function. 5. Modify the cycle parameters: CY3 Cycle 3 parameters family. Ln3 Sh3 1 Long Wash Phase [min] 40 Short Wash Phase [s] 6. Switch OFF and then switch ON the machine. 7. Modify Detergent dosage: GEn Enter into GEn parameter family. dIn 70 Initial Detergent Dosage [s]. rIn 5 Initial Rinse Aid Dosage [s]. 8. Cnt Counters rCy 20 Number of cycles allowed before regeneration. 9. Switch OFF and then switch ON the machine. DOC. NO. 5956.446.06 ©Copyright 2005 by Electrolux Professional P.47/88