Electrolux EI28BS56IW Use and Care Guide - Page 7

installation

Page 7 highlights

installation 7' To level the cabinet using the front rollers (select models): 1 Slightly open freezer drawer. Lift the left side of the toe grille and gently pull forward (see illustration). 2 Lift the right side of the toe grille and gently pull forward to remove toe grille (see illustration). 5 After unit is leveled, lower anti-tip leg until it contacts the floor. 3 Close the drawer and use a flat-blade screwdriver or %-inch socket wrench to raise or lower the front rollers, 4 Ensure both doors are bind-free with their seals touching the cabinet on all four sides. Paise Raise Anti-tip NOTE The anti-tip leg must be in contact with the floor to keep the refrigerator stable. DO NOT use the anti-tip leg to level the refrigerator. 6 Replace the toe grille by fitting it into place,

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38

installation
7'
To level the cabinet using
the front
rollers
(select
models):
1
Slightly open freezer drawer.
Lift the left side
of the toe grille and gently pull forward (see
illustration).
2
Lift the right side of the toe grille and gently pull
forward to remove toe grille (see illustration).
5
After unit is leveled, lower anti-tip leg until it
contacts the floor.
3
4
Close the drawer and use a flat-blade
screwdriver
or %-inch socket wrench to raise or lower the
front rollers,
Ensure both doors are bind-free with their seals
touching the cabinet on all four sides.
Paise
Raise
Anti-tip
NOTE
The anti-tip leg must be in contact with the floor to
keep the refrigerator
stable.
DO NOT use the anti-tip
leg to level the refrigerator.
6
Replace the toe grille by fitting it into place,