Electrolux EI30GS55LW Installation Instructions (All Languages) - Page 2
To avoid cooktop breakage for cutout width E dimension of more than
View all Electrolux EI30GS55LW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
30" GAS SLIDE-IN RANGE INSTALLATION INSTRUCTIONS (Models with Sealed Top Burners) NOTE: 1. Do not pinch the power supply cord or the flexible gas conduit between the range and the wall. 2. Do not seal the range to the side cabinets. 3. 24" (61 cm) minimum clearance between the cooktop and the bottom of the cabinet when the bottom of wood or metal cabinet is protected by not less than ¼" (0,64 cm) flame retardant millboard covered C with not less than No. 28 MSG sheet metal, 0,015"(0,4 mm) stainless steel, 0,024"(0,6 mm) aluminum, or 0,020" (0,5 mm) copper. Door Open 30" (76,2 cm) minimum clearance when (see note 5) A the cabinet is unprotected. 4. For cutouts below 22 7/8"(58,1 cm), appliance will slightly show out of the cabinet. 5. Allow at least 19 ¼" (48,9 cm) clearance for door depth when it is open. D B Figure 1 Side panel * IMPORTANT: To avoid cooktop breakage for cutout width (E dimension) of more than 30 1/16" (76,4 cm), make sure the appliance is centered in the counter opening while pushing into it. Raise leveling legs and the rear adjustable wheels at a higher position than the cabinet height (see page 3), insert the appliance in the counter and then level. Make sure the unit is supported by the leveling legs at the front and the wheels at the back and NOT by the cooktop itself. 22 7/8" (58,1 cm) min. 23 1/4" (59,05 cm) max. (see Note 4) FRONT OF CABINET 1 1/8" (2,86 cm) F Ref. A. HEIGHT B. WIDTH 35 5/8" (90.5 cm) 30" (76,2 cm) - 36 5/8" (93 cm) C. COOKTOP WIDTH 31½" (80 cm) D. DEPTH TO FRONT OF RANGE 28 5/16" (71,9 cm) E. CUTOUT WIDTH* (Countertop and Cabinet) 30±1/16" (76,2±0,15 cm) F. CUTOUT DEPTH 21 3/4" (55,2 cm) Min. 22 1/8" (56,2 cm) Max 24" (61 cm) Min. with backguard G. HEIGHT OF COUNTERTOP 36 5/8" (93 cm) Max. 35 3/4" (90.8 cm) Min. 2