Electrolux EI48HI55KS Complete Owner's Guide (Español) - Page 9
Electrolux EI48HI55KS Manual
![]() |
View all Electrolux EI48HI55KS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Blower Motor Systems Installation Dual Blower Motor Assembly 8. Align mounting holes and install 6 x 16 mm bolts and 6.4 mm lock washers. A A.Wiring connection A A. Bolt with lock washer B. Mounting hole B 9. Attach power cord connector from the hood insert to connector on wiring box. A. Wiring Box Connector A B. Hood Insert Connector B 6. To install blower motor assembly, slide the left mounting plate flange under the motor mounting bracket. 10. Install 10" round ducting damper with 4 - 4.2 x 8 mm mounting screws. A B B A B A.Motor mounting bracket B.Mounting plate left flange 7. A Push the right end of the motor mounting plate down and snap it into the spring tab. NOTE: The spring tab should be outside the slot in the mounting plate. A. 10" round ducting damper B. Installation screws 11. Continue to Prepare the Location on page 12. B A. Motor mounting plate B. Spring clip
![](/manual_guide/products/electrolux-ei48hi55ks-complete-owners-guide-espa241ol-9f96e12/9.png)