Electrolux EIGD55H Installation Instructions - Page 18

installation instructions FIRE HAZARD Before operating the dryer, make sure the dryer area is clear and free of combustible materials, gasoline, and other flammable vapors, Also see that nothing (such as boxes, clothing, etc.) obstructs the flow of combustion and ventilation air. - ,j On gas dryers, before the burner will light, it is necessary for the gas line to be bled of a_r.If the burner does not light within 45 seconds the first time the dryer is turned on, the safety switch will shut the burner off. If this happens, press cancel and wait 5 minutes before making another attempt to light. If your dryer has this console: o'3c : : : @ O Oo 1. Empty the dryer drum. 2.After you plug in the dryer the first time: wake up the dryer by pressing any button, rotate cycle knob to touch up cycle, press the start button and then the cancel button. 3.Wake up the dryer again by pressing any button, then immediately and simultaneously press and hold both the sanitize and my favorite buttons for 5 seconds, or until the LCD display changes. 4.The LCD window will display llISTRLC21CL_and show estimated time of cycle completion. Press the start button. The Installation Cycle will automatically test for correct cord connection (on electric models) and presence of gas supply (on gas models). At cycle completion, the LCD window may display II",STRLPRSFJ,meaning your new dryer is properly installed and ready for use. If it prompts an action such as S_R(/_C_COROI,I0 L-,RSor S_,LLS_{IlC_ 877 ff35 3_87, review the installation steps and make the necessary corrections before you attempt to use the dryer. 5.Your dryer will exit the Installation Cycle and return to normal operation the next time you wake it up. Dryer will stay awake for 3 minutes after the Installation Cycle. If you wish to immediately run the dryer through a drying cycle, press the cancel button to put the unit to sleep and then rewake it immediately to continue the normal operating mode. 6. Please read the Use & Care Guide and enjoy your new premium dryer! If your dryer has this console: l 1 .After you plug in the dryer the first time: wake up the dryer by pressing any button and follow the prompts on the LCD User Interface, including language selection. 2.The Installation Cycle will automatically test for correct cord connection (on electric models), presence of gas supply (on gas models) and free flow of exhaust vent. At cycle completion, the LCD user interface may display II",STRLPRSS;,meaning your new dryer is properly installed and ready for use. If it prompts an action such as S__-_(/ICC_O°,OI,'_05RS or CRLL.c__-_(/IC87_7 u,353287, review the installation steps and make the necessary corrections before you attempt to use the dryer. 3.Your dryer will exit the Installation Cycle and return to normal operation the next time you wake it up. Dryer will stay awake for 3 minutes after the Installation Cycle. If you w_sh to immediately run the dryer through a drying cycle, press the cancel button to put the unit to sleep and then rewake it _mmediately to continue the normal operating mode. 4. Please read the Use & Care Guide and enjoy your new premium dryer!