Electrolux ELFW4222AW Complete Owners Guide English - Page 15

Other Features

Page 15 highlights

Controls and Settings 15 1 2 1. Cycle Countdown 2. Delay Start Timer Other Features illuminated, no additional garments should be added to the wash load. Control Lock To avoid having someone accidentally start or stop the washer, press the control lock button . To unlock the controls, press the control lock button again . Mute Sound A chime will sound at the end of the cycle when this option is not activated. The signal can be turned on or off by pressing the mute sound button. Please note that activating the mute sound option will not mute all sounds emitted by the console. This option only silences the end of cycle tone. Delay Start Press delay to select a wash time convenient to your schedule or during off peak energy hours. The delay time selected will be displayed and begin counting down when you select start. A cycle can be delayed up to a max of 6 hours. Status Display/Timer The estimated total cycle time will be displayed when the cycle is selected. The time may increase if water pressure is low, oversudsing occurs or the load becomes unbalanced. The estimated remaining cycle time is displayed throughout the cycle. NOTE If the temperature and water level are too high, the door will remain locked. Eco Indicator The eco symbol will light up on the LED display to indicate that the selected combination of temperature, spin speed and options is eco friendly. Pump Cleanout/Manual Drain In the event the washer will not drain under its own power due to a power outage or clogged drain pump you can drain the water left in the tub manually. See the "Pump Filter Cleaning" in "Care and Cleaning" section. Door Lock Indication While the cycle is in progress, the LED above the start/pause button will be continuously lit, indicating that the door is locked. When the LED is lit continuously, do not force open the door. Wait until the LED above the start/ pause button is blinking before attempting to open the door. Add a Garment The text ADD A GARMENT will be illuminated through the water filling phase of a wash cycle. While ADD A GARMENT is lit, the cycle can be paused, and once the door is unlocked, any additional garments can be added to the load. When ADD A GARMENT is no longer

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

Other Features
Control Lock
To avoid having someone accidentally start
or stop the washer, press the
control lock
button
. To unlock the controls, press the
control lock
button again
.
Mute Sound
A chime will sound at the end of the cycle
when this option is not activated. The signal
can be turned on or off by pressing the
mute
sound
button. Please note that activating the
mute sound option will not mute all sounds
emitted by the console. This option only
silences the end of cycle tone.
Delay Start
Press
delay
to select a wash time convenient
to your schedule or during off peak energy
hours. The delay time selected will be
displayed and begin counting down when you
select
start
. A cycle can be delayed up to a
max of 6 hours.
Status Display/Timer
The estimated total cycle time will be
displayed when the cycle is selected. The
time may increase if water pressure is low,
oversudsing occurs or the load becomes
unbalanced. The estimated remaining cycle
time is displayed throughout the cycle.
Add a Garment
The text
ADD A GARMENT
will be illuminated
through the water filling phase of a wash cycle.
While
ADD A GARMENT
is lit, the cycle can
be paused, and once the door is unlocked,
any additional garments can be added to the
load. When
ADD A GARMENT
is no longer
Controls and Settings
illuminated, no additional garments should be
added to the wash load.
NOTE
If the temperature and water level are too
high, the door will remain locked.
1
2
Eco Indicator
The
eco symbol
will light up on the
LED display to indicate that the selected
combination of temperature, spin speed and
options is eco friendly.
Pump Cleanout/Manual Drain
In the event the washer will not drain under its
own power due to a power outage or clogged
drain pump you can drain the water left in the
tub manually. See the “Pump Filter Cleaning”
in “Care and Cleaning” section.
Door Lock Indication
While the cycle is in progress, the LED above
the
start/pause
button will be continuously
lit, indicating that the door is locked. When
the LED is lit continuously, do not force open
the door. Wait until the LED above the
start/
pause
button is blinking before attempting to
open the door.
1.
Cycle Countdown
2.
Delay Start Timer
15