Electrolux EW30EF65GS Complete Owner's Guide (English) - Page 10

10 Getting Started Setting clock at power up Timers You will be prompted to enter the time of day in the event of a power failure or when you first provide electric power to your appliance. • When your appliance is first powered up, 12:00 will flash in the display. • Enter the time of day using the numeric key pads and press START to set. If an invalid time of day is entered, the control will triple beep. Re-enter a valid time of day and press START. If CANCEL is pressed your clock will start with the time set for 12:00. Select the user pref key to modify the time of day during other situations such as day light savings. Wave-Touch™ display modes The two timers provided with the oven control serve as extra reminders in the kitchen. When a timer reaches less than 1 minute the display will start to count down in seconds. When the time runs out the active timer will beep, "00:00" will display and the timer key will flash. The following time settings apply to the timers: • Min. time: 1 minute • Max. time: 11 hours 59 minutes See example below to set the timer for 5 minutes: Step Example Press Sleep mode Your control will remain in a sleep mode when not in use, unless there is a hot element -Fig.1-. Only the clock will display during this mode. You will need to wake the control to begin any function. Awake mode To awake the control touch within the display panel -Fig. 2-. If the control panel is not touched again within 2 minutes, the control will return to the sleep mode. To start cooking you must select either the upper oven, lower oven, or a surface element. User preferences will be available during this mode as well as timers, oven light and the control lock. 1. Press TIMER 2. Enter 5 minutes 3. Press TIMER To cancel after setting the timer, press the TIMER key again. NOTE The timer(s) will not affect the cooking process. Sleep mode Awake mode Fig.1 Fig.2