Electrolux RH36PC60GS Complete Owner's Guide (English) - Page 12

12 Installing the hood Connecting the ductwork • Install ductwork, making connections in the direction of airflow as illustrated. • Push duct over the exhaust outlet. • Wrap all duct joints and the flange connections with duct tape for an airtight seal. • Make the same connection in the wall or ceiling vent exit. Airflow • Measure from the bottom of the air deflector to the bottom of the hood outlet, as shown. Duct tape over seam Air deflector installation (Recirculating accessories) • Assemble the air deflector with the duct cover bracket with 4 assembly screws provided as shown. • Cut the duct at the measured size. • Uninstall the air deflector removing the 4 assembly screws. • Slip the duct onto the bottom of the deflector. • Place the assembled deflector and duct over the exhaust outlet from the hood. Assemble the air deflector with the duct cover bracket with 4 assembly screws provided as shown. • Use duct tape to seal the deflector and at the exhaust outlet from the hood.