Electrolux RH36PC60GS Complete Owner's Guide (English) - Page 17
Care and cleaning
UPC - 012505558757
View all Electrolux RH36PC60GS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
17 Care and cleaning Care and cleaning The efficiency of the range hood system depends on the cleanliness of the intake and filters. The frequency of cleaning depends on the amount and type of cooking. • Do not use the ventilating system without the filters in place or with grease-laden filters or surfaces. Lights Before replacing the lamps, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally. To avoid risk of fire and explosion do not use flammable liquids or solvents. Always unplug or disconnect the appliance from the power supply before servicing. Be sure the entire hood (including the filters and light bulbs) has cooled and grease has solidified before attempting to clean any part of the appliance. NOTE: Turn off the lights and fan. Allow the lights to cool before handling. If new lights do not operate be sure lights are inserted correctly before calling service. Replace Lights • Remove the inner lamp lens cover by inserting a small flat blade screwdriver into each of the three slots and gently prying it free. NOTE: Do not remove the outer trim ring (lamp assembly). Filters The metal grease filters are made of anodized aluminum and are long lasting. To Remove The Metal Grease Filters • Turn the fan and lights off. • Pull the spring release handle. • Grasp the bulb and pull it straight out. • Replace with 12 volt, 20 watt halogen bulbs with a G4 base SUITABLE FOR USE IN OPEN LUMINAIRES. Follow package directions, wear gloves, do not touch bulb with your bare fingers. Bulb To Replace The Metal Grease Filters • Reverse procedure. To Clean Filters • It is recommended that the filters be washed at least once a month; they can be washed by hand or in the dishwasher. • Drain water through edge holes and let each filter dry thoroughly before replacing it. • Replace inner cover by inserting the three retaining tabs into the three slots and pressing them firmly in place.