Epic Fitness A17u Bike User Manual - Page 10

11. Tip: It may be necessary to turn the Adjustment Knob (27) and adjust the angle of 11 the Pivot Bracket (35). Attach the Lower Pivot Cover (12) to the Pivot Bracket (35) with two M4 x 12mm Screws (75). Make sure that the indicated wire (A) is not covered by the Lover Pivot Cover (12) (see the drawing in step 12). 75 35 A 27 12 12. Tip: Avoid pinching the wires. Orient the Upper Pivot Cover (9) as shown. Press the Upper Pivot Cover onto the Lower Pivot Cover (12). 12 80 9 Attach the Upper Pivot Cover (9) to the Console (13) with an M4 x 15mm Screw (80). Avoid pinching the wires 13 12 A 13. Identify the Left and Right Upright Covers (14, 15) and orient them as shown. Have a second person hold the Right Upright Cover (15) near the right side of the Upright (4) Connect the wire on the Receiver (59) to the wire (A) in the Upright. Insert the excess wire into the Upright (4). Tip: Avoid pinching the wires. Press the Left and Right Upright Covers (14, 15) together around the Upright (4). 13 4 14 15 59 A Avoid pinching the wires 10