Epic Fitness A17u Bike User Manual - Page 9
Tip: Avoid pinching the Pulse Wire 17
View all Epic Fitness A17u Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
8. Orient the Handlebar (5) as shown. 8 Tip: Avoid pinching the Pulse Wire (17) and Avoid pinching the Main Wire (58). Attach the Handlebar (5) the wires 72 to the Pivot Bracket (35) with six M8 x 13mm Screws (72). 5 17 72 35 58 9. Untie and discard the wire tie (not shown) on the Main Wire (58). Have a second person hold the Console (13) near the Pivot Bracket (35). Insert all the wires on the Console (13) downward through the hole in the center of the Pivot Bracket (35). Connect the Main Wire (58) and the Pulse Wire (17) to the matching wires on the Console (13). Insert the remaining wire (A) downward into the Upright (4) and pull it out of the hole in the left side of the Upright. 9 Wires 35 17 58 4 A 10. Tip: Avoid pinching the wires. It may be necessary to turn the Adjustment Knob (27) and 10 adjust the angle of the Pivot Bracket (35). 35 Attach the Console (13) to the Pivot Bracket (35) with four M4 x 12mm Screws (75). 75 13 13 27 Avoid pinching the wires 9