Epic Fitness A17u Bike User Manual - Page 8

6. Orient the Front Shield Cover (7) and the Upright (4) as shown. Slide the Front Shield Cover onto the Upright. While a second person holds the Upright (4) near the Frame (1), tie the lower end of the wire tie in the Upright to the Main Wire (58). Then, pull the upper end of the wire tie until the Main Wire is routed through the Upright. Tip: To prevent the Main Wire (58) from falling into the Upright (4), secure the Main Wire with the wire tie. Tip: Avoid pinching the Main Wire (58). Slide the Upright (4) onto the Frame (1). Attach the Upright with five M10 x 25mm Screws (74). Then, slide the Front Shield Cover (7) downward and press it onto the Left and Right Shields (10, 11). 6 Wire Tie 74 58 Avoid pinching the Main Wire (58) 4 7 74 Wire Tie 1 10, 11 7. Attach the Accessory Tray (46) to the Upright (4) with four M4 x 15mm Screws (80). 7 46 4 80 80 8