Epic Fitness A30e Elliptical English Manual - Page 10
Tip: To prevent the Main Wire Harness 110
View all Epic Fitness A30e Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
7. While a second person holds the Upright (4) near the Frame (1), locate the wire tie in the Upright. See the inset drawing. Tie the lower end of the wire tie to the Main Wire Harness (110). Pull the upper end of the wire tie until the Main Wire Harness (110) is routed through the Upright (4). Tip: To prevent the Main Wire Harness (110) from falling into the Upright (4), secure the Main Wire Harness with the wire tie. 7 4 Wire Tie 110 1 Wire Tie Wire Tie 110 8. Tip: Avoid pinching the Main Wire Harness (110). 8 Slide the Upright (4) onto the Frame (1). Attach the Upright with seven M8 x 16mm Screws (72); do not fully tighten the Screws yet. Do not press the Shield Cover (75) into place yet. 75 72 72 1 110 Avoid pinching the Main Wire Harness (110) 4 72 10