Epic Fitness A30e Elliptical English Manual - Page 12
Arm Axle 35. Move the Right Pedal Arm 58
View all Epic Fitness A30e Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
10. Using a plastic bag to keep your fingers clean, apply a generous amount of the included grease to the Arm Axle (35) and to two Wave Washers (95). Insert the Arm Axle (35) into the Upright (4) and center it. Then, slide a Wave Washer (95) onto each end of the Arm Axle. With the help of a second person, slide the Right Upper Body Leg (36) onto the right side of the Arm Axle (35). Move the Right Pedal Arm (58) to the right, and set it on the floor; do not set it on the Ramp Top Cover (10). With the help of a second person, slide the Left Upper Body Leg (46) onto the left side of the Arm Axle (35), and set the Left Pedal Arm (44) on the floor; do not set it on the Ramp Top Cover (10). Then, tighten an M8 x 16mm Screw (72) with an M8 x 23mm Washer (98) into each end of the Arm Axle (35) at the same time. 10 72 95 98 46 44 10 Grease 35 95 36 98 4 72 Grease 11. Apply a small amount of grease to a Pedal Arm Axle (24). 11 Insert the Pedal Arm Axle (24) into the Right Pedal Arm (58) and the Right Roller Arm (45). Next, tighten an M10 x 16mm Screw (33) with an M10 x 25mm Washer (148) into each end of the Pedal Arm Axle (24) at the same time. Then, tighten the indicated M8 x 16mm Screw (72). Repeat this step on the left side of the elliptical. 58 72 33 45 148 58 Grease 24 148 33 12