Epson 11880 Quick Reference Guide - Page 3

Loading Roll Paper 1 Slide the black paper stop off the end of the spindle. Note: To use paper with a 3-inch core, attach the gray adapters to the paper stops at each end. See your Printer Guide for details. 2 Position the roll as shown, then slide the spindle into the roll. 3 Slide the black paper stop back onto the spindle and insert it firmly into the end of the roll. 4 To adjust the tension, slide the switch to H for high tension (for most fine art papers) or N for normal. 9 Release the paper lever. If the lever is locked, press and hold the button for 3 seconds to unlock it. 10 Feed the paper into the slot and pull it all the way through. 11 Turn the roll back to remove any slack. Then align the bottom edge with the horizontal and vertical lines. 5 Open the roll paper cover. 6 Place the roll paper in the printer as shown. (The black end of the spindle goes on the left.) 12 Return the paper lever to the locked position. Then close the roll paper cover. 7 Align the roll with the rails on both sides, and roll it onto the mounting brackets. 8 Make sure the printer is turned on, then press the Paper Source button until the or icon appears. 13 Press the Pause button. The paper feeds into printing position. 14 Check the printer's control panel and select the correct media type. 2