Epson 1730W User's Guide - Page 15
Turning the Projector On and Off - projector manual
UPC - 010343869547
View all Epson 1730W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Ideally, you should place the projector directly in front of the center of the screen, facing it toward the screen squarely. The base of the lens should be at about the level of the bottom of the screen. Projector Screen note After positioning the projector, you may want to connect a Kensington MicroSaver® anti-theft device to the lock port on the projector. You can purchase this from Epson; see page 12. If you place the projector below screen level, you'll have to tilt it up by extending the front adjustable foot. This causes the image to become "keystone" shaped, but you can correct the distortion by pressing the buttons on the projector. See page 23 for detailed information about correcting the image shape. For instructions on installing the projector in a permanent location, such as a theater or conference room, see page 89. Turning the Projector On and Off Make sure your projector and any computer or video equipment are connected as described on page 39. Turn on your connected equipment before starting the projector so it can automatically detect and display the image source. If you turn on the projector first, or have multiple pieces of connected equipment, you may have to select the image source manually (see page 18). Displaying and Adjusting the Image 15