Epson 3590 Product Information Guide - Page 7

Epson Perfection 3590 Photo If an error occurs, the scanner stops operating and the scanner light flashes red. This indicates one of the following problems: ❏ The scanner is not connected to your computer properly or your software is not fully installed. See the Start Here sheet that came with your scanner for instructions on installing the scanner software and connecting the scanner to your computer. ❏ The scanner transportation lock is locked. Slide the lock to the unlock position. After trying these solutions, turn off the scanner by unplugging its power cord, then plug it in to turn it back on. If the scanner light is still flashing: ❏ The scanner may be malfunctioning. ❏ The scanner lamp may need to be replaced. ❏ The connected optional equipment may be malfunctioning. Related Documentation CPD-19431 CPD-19432 CPD-19433 - Epson Perfection 3490/3590 Photo Start Here sheet Epson Perfection 3490/3590 Photo Scanner Software CD-ROM Epson Perfection 3490/3590 Photo Notices booklet Epson Perfection 3490/3590 Photo User's Guide (HTML) Transporting the Scanner Before transporting the scanner for a long distance or storing it for an extended period of time, you need to lock the scanner's carriage to prevent damage. 1. Plug in the scanner, connect it to your computer, and wait until the carriage moves to the home position (position nearest the buttons). While the ] Start light is green, unplug the scanner. 2. If the cover cable is attached, disconnect it. 3. To lock the transportation lock, lift the scanner and slide the lock to the locked position. This secures the carriage. Caution: Do not turn the scanner over; this may damage it. 4. Attach the protective materials and repack the scanner in its original box. 6/05 Epson Perfection 3590 Photo - 7