Epson 600Q User Manual - Page 86

Specifications Default Settings The table below shows the default settings that take effect when the printer is initialized. To change these settings, follow the instructions in "Built-in Fonts and Character Tables." Item Top-of-form position Page length Left and right margins Line spacing Character pitch Vertical tab position Horizontal tab positions Font selection Special printing effects User-defined character set Default setting Current paper position Single sheets: 22 inches Cancelled 1/6-inch line spacing Last font selected using default setting mode Cleared Every eight characters Last font selected using default setting mode Cancelled (except condensed and economy printing) Hardware/control panel initialization: cleared Software initialization: deselected only Built-in Fonts and Character Tables Your printer has eight built-in fonts and eleven character tables that you can select using the printer's default setting mode as described below. The setting you choose takes effect each time you turn on the printer. Available fonts and character tables are listed on page A-2. Note: The font and character table selections you make with your software override the settings you make using the default setting mode. For best results, use your software to make these settings. To change the default font or character table, follow these steps: 1. Make sure the printer is turned off and paper is loaded in the sheet feeder. (Use paper at least 8.3 inches wide. Otherwise the print heads will spray ink directly onto the platen.) 2. Hold down the 4 cleaning button and turn on the printer. The printer loads a sheet of paper and prints a brief summary and instructions. 3. Follow the instructions on the sheet and press the 4 cleaning button until the control panel lights indicate the language of your choice. A-8