Epson ActionNote 890 User Manual - Page 55
Upgrading Internal Components, the plastic strip above the keyboard.
![]() |
View all Epson ActionNote 890 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
4. Remove the plastic caps on both sides of the case below the screen. Use a small screwdriver to pry each cap loose and then slide it off, as shown. 5. Use a small screwdriver to gently pry up the plastic strip above the keyboard. You can pry in the center as shown here, or in front of the left and right hinges. 5-8 Upgrading Internal Components
![](/manual_guide/products/epson-actionnote-890-user-manual-56ef491/55.png)
4.
Remove the plastic caps on both sides of
the case below the screen. Use a small
screwdriver to pry each cap loose and
then slide it off, as shown.
5.
Use a small screwdriver to gently pry up
the plastic strip above the keyboard. You
can pry in the center as shown here, or in
front of the left and right hinges.
5-8 Upgrading Internal Components