Epson ActionNote 890 User Manual - Page 64
Connecting a Phone Line, to the fax/modem in your ActionNote with
View all Epson ActionNote 890 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
7. If you are finished installing internal components, replace the keyboard as described under "Replacing the Keyboard." 8. Run Setup, as described under "Customizing Computer Settings" in Chapter 6, to make sure the port address is set correctly for the fax/modem or the Infrared device. The default setting Is COM2. For information about using your fax/modem, see the following section. For more information on using an infrared device, see Appendix B in the online manual. Connecting a Phone Line You can connect your telephone line directly to the fax/modem in your ActionNote with a standard RJ-11 telephone cable. Before you connect the phone line, you need to install the software that came with your fax/ modem. See your software manuals for Instructions on installing these programs and using them with your system. Upgrading Internal Components 5-17