Epson ActionPrinter 4500X User Manual - Page 187
The print position is not what you expected., Troubleshooting 7-5, occur in the printout.
View all Epson ActionPrinter 4500X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
Printing The print position is not what you expected. Printing starts too high or too low on the page. Use micro-adjustment to adjust the loading position. Check the top margin set by your application software and adjust it. All the text is printed on the same line. Set DIP switch 2-4 on so the printer automatically adds a line feed code to each carriage return. The text is printed with an extra blank line in between. Two line feed signals are being sent. Set DIP switch 2-4 off. Page length does not match the length of the paper. Check the page length set by DIP switches 1-4 and 1-5. Check the page length set by your application software and adjust it if necessary. Regular gaps occur in the printout. One-inch skip over perforation may be set. Set DIP switch 2-3 to off. Skip over perforation is set, but the perforation does not fall in the center of the skip. Adjust the loading position. Troubleshooting 7-5