Epson C130001 User Manual - Page 49
Adjusting the paper-thickness lever, lever is on the left side of the printer. The numbers next to
UPC - 010343810808
View all Epson C130001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
For multi-part forms and labels, you should not print any closer than 0.5 inch or 13 mm from either side of the paper. For information on the printable area of envelopes, see the Appendix. Adjusting the paper-thickness lever The paper-thickness lever lets you specify the correct setting for your printing material. It is factory-set for standard office paper. Here's how to change the setting for special papers: 1. Turn the printer off and open the cover. The paper-thickness lever is on the left side of the printer. The numbers next to the lever indicate the thickness setting. For normal use, the lever should always be set to position 0. 2 3 2. Use the table below to select the appropriate paper thickness. Paper type Standard paper (single sheets or continuous) Multi-part forms 2-sheet 3-sheet Labels Envelopes 18 to 22 lb 24 lb Lever position 0 0 1 1 2 3 2-16 Using the Printer