Epson C276001 User Setup Information - Page 4
Loading Continuous Paper Onto the Front Push Tractor, User's Guide
![]() |
View all Epson C276001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Loading Continuous Paper Onto the Front Push Tractor To load continuous paper onto the front push tractor, follow these steps: Note: To use the front push tractor, install the tractor unit in the front position and load continuous paper in the front slot. 1 2 Open the front paper guide by pulling the tab in the center. Remove the guide by grasping both sides and pulling it straight out of the printer. Open both sprocket covers and fit the first three holes of the paper, printable side up, over the tractor pins. Then close the sprocket covers. Note: Load continuous paper that has a clean, straight edge to avoid paper jams. Q To feed continuous paper to the standby position where you can remove it easily, press the Load/Eject button. Q When you load continuous paper of a different size or thickness, adjust the position of the sprockets or change the paper thickness lever setting. See Chapter 2 of the User's Guide for instructions. 4
![](/manual_guide/products/epson-c276001-user-setup-information-7ad6866/4.png)