Epson C31C636A898 Technical Reference - Page 39
Connecting Power Supply Unit and Cash Drawer
View all Epson C31C636A898 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
TM-T88IV Technical Reference Guide 2.5.5 Wireless LAN Interface Connection For details on how to set up a wireless LAN interface, see the UB-R02 Technical Reference Guide. 2.6 Connecting Power Supply Unit and Cash Drawer Always use one of the following power supplies: The EPSON PS-180 (the currently available power supply that can be used with the TM-T88IV). Use the cash drawer handled by EPSON or your dealer. WARNING: Always use the EPSON PS-180 or an equivalent product as the power supply unit. Using a nonstandard power supply can result in electric shock and even fire. Should a fault ever occur in the EPSON PS-180, or equivalent product, immediately turn off the power to the printer and remove the power supply cable from the wall socket. 2.6.1 Connecting the Power Supply Unit 1. Make sure the printer's power supply is turned off and the power supply unit's power cable has been removed from the wall socket. 2. Check the specifications label on the power supply unit to confirm that the wall socket power supply meets the rated voltage requirements. 3. Insert the connector of the power supply cable onto the power supply connector (labeled DC24V). FG FG DK DC24V Figure 2-20 Connecting the power supply Power supply connector Rev. A Setup 2-15